Texa Climate Control
Climate control Equipment for Electrical Enclosures
Enclosures can require additional climate control for their correct running This can be due to either the heat generated by equipment in the enclosure, or the heat from the sun if the enclosure is in an exposed location. Texa climate control to keep your equipment at the optimum operating temperature using fans, air conditioning, a range of heat exchangers or even heaters to prevent condensation in more humid and colder locations.
Texa EGO
Air conditioners for door/wall mounting with cooling capacities from 380 to 10450W.
Texa DEK
Air conditioners for roof mounting with cooling capacities from 380-4050W.
Texa BLU/BIT
Air-water heat exchangers in wall (BLU) or roof (BIT) mounting configurations with cooling capacities from 1750 to 15000W.
Texa MIX
Air-air heat exchangers for wall mounting available with specific cooling powers from 14 to 80 W/K.
Texa FAN
Fans and filters for wall mounting with air flowrates from 55 to 550m³/h (for higher flowrates see the DLK range below).
Texa DLK
Ventilating units for roof mounting with air flowrates from 600 to 1050m³/h.
Texa WID
Anticondensation heaters with capacities from 45 to 550W, and configurations for natural convection, fan forced, and fan forced with built in thermostat.
Texa Accessories
A range of filter cloths, thermostats and other accessories suitable for Texa.