Special Purpose Enclosures

Special Purpose electrical enclosures are designed to meet the specific needs of a particular application. B&R’s range includes pushbutton, double door, mining and switchboard building enclosures. If your electrical enclosure has a special requirement, this might be a good place to start.

Bowen Series

Bowen Series – 316SS

An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.

More...

Connector TE - Stainless Steel

Connector TE – 316SS

The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.

More...

Connector TE - Steel

Connector TE – Zinc Coated Steel

The Connector TE is a steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.

More...

Connector TEMF - Stainless Steel

Connector TE MF – 316SS

The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.

More...

Finucane FI – 316SS

Finucane FI – 316SS

The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.

More...

Hedland PH – 316SS

Hedland PH – 316SS

A 15 degree sloping roof enclosures for electrical and electronic control equipment in rugged, dusty industrial applications.

More...

Incline SR

Incline SR – 316SS

The Incline SR is a stainless steel IP66 enclosure for the mining and mineral processing industries. It features an innovative 30 degree sloping roof that reduces the build up of debris and waste material.

More...

Lambert LB – 316SS

Lambert LB – 316SS

The Lambert LB is a 316 stainless steel, sun shaded enclosure designed for applications where the enclosure has a high risk of heating up due to excessive solar radiation.

More...

Miner ME – Zinc Coated Steel

Miner ME – Zinc Coated Steel

The Miner ME is designed to be used in underground for 1000 Volt applications. It’s made from 2mm thick steel with polyester paint to provide superior protection and visibility.

More...

Monarch SMB

Monarch SMB

An IP66, small main board (up to 630A) developed as a solution to local electricity and distribution requirements in remote metering application or emergency power restorations.

More...

Pilbara SP

Pilbara SP

The Pilbara SP is an IP66 enclosure for the mining and mineral processing industries. Developed to withstand the harsh environments of the Pilbara, it features a 30 degree sloping roof.

More...

Pilbara SP with Sunshades

An IP66, with sunshades designed for the most common mining, mineral processing and infrastructure projects.

More...

Signature SE Switchboard

Signature SE – Zinc Coated Steel

B&R’s range of IP43/IP55, type-tested, certified, switchboard building system for Low Voltage switchboards and motor control centres (MCC’s).

More...

Universal DD - Stainless Steel

Universal DD – Stainless Steel

The Universal DD is a stainless steel IP55, double door enclosure from B&R. It has no centre mullion making installation and access to equipment easy and convenient.

More...

Universal DD - Zinc coated steel

Universal DD – Zinc Coated Steel

The Universal DD is a steel IP55, double door enclosure from B&R. It has no centre mullion making installation and access to equipment easy and convenient.

More...

Universal PB

Universal PB

A modular universal distribution board that is weatherproof and highly robust. Ideal for new or existing distribution boards and a great alternative for power distribution.

More...