Ausrack Cable Management
The Ausrack Plus Network and Server cabinets are enhanced with the addition of vertical and horizontal cable management solutions.
Archives
Polynova PU
A non-metal, IP66 rated enclosure suitable for harsh environments and low voltage (LV) double insulated applications.
Monarch SMB
An IP66, small main board (up to 630A) developed as a solution to local electricity and distribution requirements in remote metering application or emergency power restorations.
Lambert LB – 316SS
The Lambert LB is a 316 stainless steel, sun shaded enclosure designed for applications where the enclosure has a high risk of heating up due to excessive solar radiation.
Hedland PH – 316SS
A 15 degree sloping roof enclosures for electrical and electronic control equipment in rugged, dusty industrial applications.
Finucane FI – 316SS
The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.
Bowen Series – 316SS
An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.
GRP Terminal Box
An IP66, light weight terminal enclosure that blend into an area and are easy-to-install.
Pilbara SP with Sunshades
An IP66 enclosure with sunshades designed for the most common mining, mineral processing and infrastructure projects.
Climate Control Accessories
Climate control accessories such as spare filters to prevent dust entering the enclosure, thermostats, humidistats, level switch and solenoid valves.
Anti-condensation Heater
The WID range of anticondensation heaters are suitable for installation in all enclosures, designed to protect equipment from water damage due to condensation.
Air/Water Heat Exchangers
A range of roof mounted air-water heat exchangers designed to cool electrical enclosures using a chilled water source.
Air-Air Heat Exchanger
The MIX range of wall or door mounted air-air heat exchangers have been designed to cool electrical enclosures using ambient air.
Roof Mounted Air Conditioners
The range of roof mounted air conditioners have been designed to cool electrical enclosures to prevent failure of installed equipment. Once installed the enclosure can be rated to IP54.
Signature SE – Zinc Coated Steel
B&R’s range of IP43/IP55, type-tested, certified, switchboard building system for Low Voltage switchboards and motor control centres (MCC’s).
Airflow Products
A range of products to support management of data centre cooling efficiency.
Transmission Racks
Designed for installation in telephone exchanges to house standard telecommunications equipment & accessories. These racks are to be secured to a superstructure.
Customer Cabinets
A range of enclosures designed for installation of telecommunications equipment inside a customer’s premises.
Miner ME – Zinc Coated Steel
The Miner ME is designed to be used in underground for 1000 Volt applications. It’s made from 2mm thick steel with polyester paint to provide superior protection and visibility.
Ausrack Wall Brackets
Light duty wall mount 19″ bracket. Suitable for applications where cabinet mounting is not practical and space is limited.
Ausrack TxD
A rack with 4 corner posts often used for Transmission & Data Applications in telecommunications exchange & data centre environments. For 19, 21, 23 or 26 inch equipment.
Ausrack Patch
A 2-post frame designed to provide a functional and cost effective solution where accessibility is a major requirement.
Ausrack Plus Frame
A 19 inch server rack frame that can be configured into suites & clad as per application requirements. The server rack features allow cable access across the front and rear of the rack.
Ausrack Plus Network
A 19 inch network cabinet combining versatility & strength with easy-to-use features. Accommodates medium to large passive patching networks & active communications equipment.
