Airflow Management

Airflow Efficiency Products

Airflow Efficiency Products

A range of products to support management of data centre cooling efficiency.

Full Height Eziblank Panels

These full height blanking panels allow you to block the airflow of full height racks in containment aisles. These are supplied as a single folded sheet to easily install without the need for tools. Simply cut along the premarked lines to the required RU height. Panels are 48RU high.

ProductHeight (RU)Width (mm)
Full Height Eziblank Panels600
Full Height Eziblank Panels800

Ezibrush Strips

EZIBRUSH™ panels keep hot exhaust air away from cool intake air, extending the life of your equipment. These panels have a brush strip overhanging the 1U size by an extra 5mm allowing simple management of air gaps when placed alongside other equipment.

ProductDescriptionTo Suit
Ezibrush StripsHorizontal, 19" Black

Eziblank Blanking Panels

The Ausrack 6RU adjustable tool less blanking panels simply snaps to the size you need and pushes onto the 19” mounting rails. The blanking panels can be easily snapped in 1RU increments to fit any gap. Made from UL94 fire rated and anti static ABS plastic.

ProductDescriptionTo Suit
Eziblank Blanking PanelsSupplied as 6 x 1RU plastic panels

Blanking Panels

Blanking panels are used to control airflow in the rack. They are manufactured from
1.2mm steel with a powdercoated matt black surface finish.

ProductDescriptionPart NumberHeight (RU)
Blanking PanelsEBP1U1
Blanking PanelsEBP2U2
Blanking PanelsEBP3U3
Blanking PanelsEBP4U4
Blanking PanelsEBP5U5
Blanking PanelsEBP6U6
Blanking panels (black)1RUEBP1U
2RUEBP2U
3RUEBP3U
4RUEBP4U
5RUEBP5U
6RUEBP6U

Cable Zone Blanking Plates

Cable zone blanking plates seal the front section of racks bayed with cable zones from the hot exhaust air at the rear of the cabinet. The cable zone blanking plates extend between the posts of the two adjoining racks over the cable zone to the full height of the racks.

ProductHeight (RU)Width (mm)
Cable Zone Blanking Plates100
Cable Zone Blanking Plates100
Cable Zone Blanking Plates100
Cable Zone Blanking Plates100

Brush Strips

Vertical brush strips are used to control airflow in the rack. They provide a barrier
between the front of the frame and hot exhaust air at the rear, between the post and the
side panel whilst also allowing cable access. Each strip attaches to the post and extends to the side panel of the cabinet.

Part NumberTo Suit
ARPBS40U0640RU x 600 wide
ARPBS40U0840RU x 800 wide
ARPBS45U0645RU x 600 wide
ARPBS45U0845RU x 800 wide
For more information please download our product leaflet or contact us.

Product Information

Download Product Information