PDU Accessories

Alarm Beacon

Enlogic’s alarm beacons have a magnetic base so it can be easily attached to the top of the rack. The alarm beacon can be added to any sensor port of any Enlogic EN series PDU or EZ series Inline Energy Meter.

Catalogue No.Description
ARPRAEA9101Alarm Beacon

Temperature Sensors

Enlogic’s temperature and humidity sensors are designed to add comprehensive
environmental monitoring to any Enlogic EN Series PDU or EZ Series Inline Energy Meter. The temperature and humidity sensor monitors the temperature and relative humidity in the data centre and transfers the data to the control centre.

Catalogue No.Description
ARPRAEA9102Temperature sensor only
ARPRAEA9103Temperature / Humidity sensor
ARPRAEA91053 Temperature, 1 Humidity sensor combination

Input Sensor Hub

Enlogic’s 3 Sensor Input Hub allows for 3 additional sensor ports to be added to either sensor port of any Enlogic EN Series PDU or EZ Series Inline Energy Meter.

Catalogue No.Description
ARPRAEA91063 sensor inputs

Door Switch Sensor

Enlogic’s door switch is a manual door switch that can be added to either sensor port of any of any Enlogic EN Series PDU or EZ Series Inline Energy Meter.

Catalogue No.Description
ARPRAEA9109Sensor for door switch

Dry Contact Input

Enlogic’s dry contact input can be connected to other auxillary equipment and feed the information through your network.

Catalogue No.Description
ARPRAEA9110Cable

Spot Fluid Sensor

Spot fluid sensor monitors a remote location for the presence of any liquid with
resistivity of less than 2M Ohms per cm (including distilled water) and transfers the data to the control centre.

Catalogue No.Description
ARPRAEA9111Complete with sensor and cable

Rope Fluid Sensor

The Rope Fluid Leak Sensor monitors for early detection of liquid with a resistivity of less than 2M Ohms per cm (including distilled water) in the monitored area along the entire length of the rope.

Catalogue No.Description
ARPRAEA9112Complete with sensor and cable

Smoke Sensor

The photoelectric smoke sensor detects smoke in the cabinet and sends the alarm signal through the EN Series PDU or EZ series Inline Meter.

Catalogue No.Description
ARPRAEA9113Sensor

Serial Connection Cable

The serial communication cable allows for a direct connection to the PDU for easy setup before connecting to the network.

Catalogue No.Description
ARPRAEA9116Includes 3m of cable

Rittal / HP Cabinet Bracket

A bracket that allows an Enlogic PDU to fit in Rittal and HP data cabinets.

Catalogue No.Description
ARPRAEA9120Bracket to suit Rittal / HP cabinets