Enclosures for all your industrial applications

Industrial Enclosures

Our range of enclosures for many different industrial applications from mining and minerals to infrastructure. Each one is designed to the highest standards, using advanced materials and to protect your assets and equipment in the field.

To find out more about our industrial enclosures, take a look at the specific categories below: –

The options below show you the range of industrial enclosures available: –

Industrial Enclosures – General Purpose Enclosures

Typically used for all general electrical applications these include plastic boxes of various types, steel and stainless steel enclosures.

Industrial Enclosures – Special Purpose

Typically designed for a specific application which varies from pushbuttons to explosion protected enclosures. If your electrical enclosure has a special requirement, this might be a good place to start.

Industrial Enclosures – Multiple Application Enclosure Systems (MAES)

These are cabinets designed for a wide variety of applications so usually need some pre-configuration and have many accessories available. They are the most flexible type of enclosure available and can be used for anything, up to a form 2 switchboard with an IP66 rating.

Bowen Series – 316SS with Sunshades

An IP66 enclosure with sunshades, perfect for increased mechanical protection and designed to meet the harsh demands of mining environments.

More...

Bowen Series - AS/NZS 61439 Compliant

Bowen Series – 316SS

An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.

More...

Connector TE - Stainless Steel

Connector TE – 316SS

The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.

More...

Connector TE - Steel

Connector TE – Zinc Coated Steel

The Connector TE is a steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.

More...

Connector TEMF - Stainless Steel

Connector TE MF – 316SS

The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.

More...

Field FC

B&R’s field enclosure is an infrastructure cabinet designed for roadside monitoring equipment with ITS equipment. It is also used for GPS stations and radio equipment.

More...

Finucane FI 316 Stainless Steel Enclosure - AS/NZS 61439 compliant

Finucane FI – 316SS

The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.

More...

Fixed Lid Control Station

Fixed Lid Control Station

Ex e rated, explosion protected, fixed lid pushbutton control station, is rated to IP66/67 and is pre-configured or custom built. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.

More...

Flat Roof Control Station

The Ex e explosion protected, flat roof control station, is rated to IP66 and is pre-configured or custom built for ease of installation one. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.

More...

Flat Roof Enclosure

Flat Roof Terminal Enclosure

The flat roof electrical box is made from 316SS and suitable for use in Zones 1 & 2, 21 & 22 applications.

More...

Forte FR

Forte FR – Steel

An IP65, steel enclosure suitable for a variety of indoor, general electrical applications. It is made from powdercoat painted steel and is available off the shelf.

More...

GRP Control Stations

Hazardous area control stations that can be combined into one unit using a maximum of six in configurations to suit the application requirements.

More...

Terminal Enclosures TBGS

GRP Terminal Box

An IP66, light weight terminal enclosure that blend into an area and are easy-to-install.

More...

Hedland PH 316 Stainless Steel Enclosure - AS/NZS 61439 compliant

Hedland PH – 316SS

A 15 degree sloping roof enclosures for electrical and electronic control equipment in rugged, dusty industrial applications.

More...

iLINQ – Stand-Alone

An IP55, multiple application, stand-alone enclosures in single or double door configurations.

More...

iLINQ Bayable Enclosures – Assembled to Order

iLINQ Bayable Enclosures – Assembled to Order

An IP55, multiple application, built-to-order bayable enclosure system.

More...

Incline SR 316 Stainless Steel Enclosure - AS/NZS 61439 compliant

Incline SR – 316SS

The Incline SR is a stainless steel IP66 enclosure for the mining and mineral processing industries. It features an innovative 30 degree sloping roof that reduces the build up of debris and waste material.

More...

Lambert LB 316 Stainless Steel Enclosure - AS/NZS 61439 compliant

Lambert LB – 316SS

The Lambert LB is a 316 stainless steel, sun shaded enclosure designed for applications where the enclosure has a high risk of heating up due to excessive solar radiation.

More...

Miner ME Zinc Coated Steel Enclosure - AS/NZS 61439 compliant

Miner ME – Zinc Coated Steel

The Miner ME is designed to be used in underground for 1000 Volt applications. It’s made from 2mm thick steel with polyester paint to provide superior protection and visibility.

More...

Monarch IP - Steel

Monarch IP – 316SS

Monarch IP from B&R is an IP66, 316 stainless steel general purpose enclosure and switchboard building system with a huge range of accessories.

More...

Monarch IP - Aluminium

Monarch IP – Aluminium

Monarch IP from B&R is an IP66, aluminium general purpose enclosure and switchboard building system with a huge range of accessories.

More...

Monarch IP – Viewing Window (AL)

Monarch IP from B&R is an IP66, aluminium general purpose enclosure and switchboard building system with a huge range of accessories.

More...

Monarch IP – Viewing Window (SS)

Monarch IP from B&R is an IP66, 316 stainless steel general purpose enclosure and switchboard building system with a huge range of accessories.

More...

Monarch IP – Viewing Window (ZS)

Monarch IP from B&R is an IP66, steel general purpose enclosure and switchboard building system with a huge range of accessories.

More...

Monarch IP – Zinc Coated Steel

Monarch IP from B&R is an IP66, steel general purpose enclosure and switchboard building system with a huge range of accessories.

More...

Monarch SMB Small Main Board Enclosure - AS/NZS 61439 compliant

Monarch SMB

An IP66, small main board (up to 630A) developed as a solution to local electricity and distribution requirements in remote metering application or emergency power restorations.

More...

Pilbara SP Enclosure - AS/NZS 61439 compliant

Pilbara SP

The Pilbara SP is an IP66 enclosure for the mining and mineral processing industries. Developed to withstand the harsh environments of the Pilbara, it features a 30 degree sloping roof.

More...

Pilbara SP with Sunshades

An IP66, with sunshades designed for the most common mining, mineral processing and infrastructure projects.

More...

Polynova PC

Polynova PC

The Polynova PC series is a range of IP66 modular thermoplastic, general purpose enclosures. They are available in 19 sizes and have a wide variety of accessories to suit almost any application.

More...

Polynova PD

Polynova PD

The Polynova PD series is a range of IP65 general purpose enclosures with a hinged door, available in 6 sizes. Manufactured from a non-metallic material (GRP) the PD is available with a wide variety of accessories.

More...

Polynova PJ

Polynova PJ from B&R is a range of IP55 modular plastic enclosures or adaptable boxes designed to house terminations and electrical components.

More...

Polynova PM

Polynova PM is an IP65 modular plastic enclosure which has been designed for use as individual enclosure or to be arranged in combinations to form complete distribution banks.

More...

Polynova PN

Polynova PN

The Polynova PN range is a hinged IP66, plastic enclosure system, with an easy to use latch assembly. It is available in 12 different sizes with opaque and transparent lids.

More...

Polynova PS

Polynova PS

The Polynova PS range, is an IP67 high performance enclosure system that is suitable for indoor and outdoor applications including use in full sunlight. There are 24 different sizes with the choice of opaque or transparent lids.

More...

Polynova PU

A non-metal, IP66 rated enclosure suitable for harsh environments and low voltage (LV) double insulated applications.

More...

Screwed Flat Roof Control Station

A customisable enclosure suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.

More...

TBSF - screwed flat roof terminal box

Screwed Flat Roof Terminal Enclosure

A customisable enclosure for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.

More...

Signature SE

Signature Express

B&R’s Signature Express is an evolution of the existing Signature offer and is designed to help our customers win more business where lead times are of importance.

More...

Signature SE

Signature SE – Zinc Coated Steel

B&R’s range of IP43/IP55, type-tested, certified, switchboard building system for Low Voltage switchboards and motor control centres (MCC’s).

More...

Sloping Roof Control Station

Suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.

More...

Hazardous Area Sloping Roof Enclosures

Sloping Roof Terminal Enclosure

The sloping roof electrical box is made from 316SS and is suitable for use in hazardous areas, Zones 1 & 2, 21 & 22.

More...

Universal DD 316 Stainless Steel Enclosure - AS/NZS 61439 compliant

Universal DD – Stainless Steel

The Universal DD is a stainless steel IP55, double door enclosure from B&R. It has no centre mullion making installation and access to equipment easy and convenient.

More...

Universal DD Zinc Coated Steel Enclosure - AS/NZS 61439 compliant

Universal DD – Zinc Coated Steel

The Universal DD is a steel IP55, double door enclosure from B&R. It has no centre mullion making installation and access to equipment easy and convenient.

More...

Universal NI 316 Stainless Steel Enclosure - AS/NZS 61439 compliant

Universal NI – 316SS

B&R’s Universal NI range of IP66 general purpose enclosures are often wall mounted using its integrated bolting. It is manufactured from 316 stainless steel with an N4 finish.

More...

Universal NI – Viewing Window (SS)

B&R’s Universal NI range of IP66 general purpose enclosures are often wall mounted using its integrated bolting. It is manufactured from 316 stainless steel with an N4 finish.

More...

Universal NI – Viewing Window (ZS)

B&R’s Universal NI range of IP66 general purpose enclosures are often wall mounted using its integrated bolting. It is manufactured from powdercoat painted steel.

More...

Universal NI Zinc Coated Steel Enclosure - AS/NZS 61439 compliant

Universal NI – Zinc Coated Steel

B&R’s Universal NI range of IP66 general purpose enclosures are often wall mounted using its integrated bolting. It is manufactured from powdercoat painted steel.

More...

Superior Universal PB