Server Racks

Server racks for 19 inch equipment. The Ausrack Plus range is designed for the data center and the onyX range more for the SOHO application.

Server racks are available in various configurations including: –

Frames only, so that the required cladding/doors etc can be bought separately. These are available with inset and corner posts.
Fully clad with side walls and front and rear doors. Again these are available with inset and corner posts.

Options are also available to suit 19 inch, 21, 23 and 26 inch equipment. For more information, see the below.

Intelligent PDUs

The intelligent PDU sits within the rack continually looking for threats from electrical circuit overloads, and any physical or environmental conditions which might place critical IT computing loads at risk.

Ausrack Floor Server onyX

A range of floor standing cabinets for small networking applications with mesh doors and 10-way Australian 3-Pin power rail.

Ausrack IP

Ausrack IP is IP66 rated 19 inch racking designed for applications when computer equipment needs to be installed into harsh environments

Field FC

An infrastructure cabinet designed specially for roadside monitoring equipment with ITS equipment. It is also used for GPS stations and for radio equipment.

Ausrack Plus Server

The Ausrack Plus Server cabinets are designed for use in applications that require a fully featured solution and combines versatility, strength and easy-to-use features.

Ausrack Floor onyX

A 19″ network rack designed for use in small office / home office applications.

Ausrack Plus Frame

The Ausrack Plus Frame is a 19 inch server rack frame that can be configured into suites and clad as per the application requirements. The server rack features allow cable access across the front and rear of the rack.

Ausrack TxD

A rack with 4 corner posts often used for Transmission and Data Applications in telecommunications exchange and data centre environments. It is suitable for 19, 21, 23 or 26 inch equipment.