Plinth Kit

• Diecast corner pieces
• Multiple fixing points
• Levelling feet
• Easy ccess to the bottom of enclosure
• Front and cladding
• Option of solid or vented
• Access for pipe lifting
• Option of 100mm or 200mm heights
• Materials
  • Plinth feet - ZA27 diecast
  • Plinth cladding - zinc coated steel
    • Thickness - 1.2mm
• Surface finish - powdercoated

 

iLINQ plinths are designed to raise the enclosure off the floor to allow access to cabling. The plinth kit includes 4 diecast corner feet (200mm high plinths use 8 corner feet) and 2 covers for the front and rear, 4 levelling feet and all fixings.

For complex plinth arrangements where you may have an enclosure in a corner (needing a font and a side cover panel), or when you want some panels vented and others not, we would recommend configuring your plinth specifically rather than using the kit. For more information see plinth cladding.

The plinth kit includes 4 diecast corner pieces (200 mm high plinths use 8 corner pieces), 2 covers for the front and rear, 4 levelling feet and all fixings. Plinth cladding features pipe lifting access holes and plugs. Plinth corner foot and cladding are powdercoated textured matt black.

Bayed suites require a plinth blanking bracket to seal between the bayed enclosures (purchased separately). This prevents vermin access into the plinth area.

Inclusions

• 4 diecast corner pieces on 100mm high plinths
• 8 diecast corner pieces on 200mm high plinths
• Levelling feet
• Front are rear cladding panels
• All fixings

Optional

• Cladding panels for sides (should the application require them) - see below
• Plinth mounting base

Selection Chart

Plinth Kits

Plinth kit with front and rear panels		Plinth Kits
Including solid panels	Including vented panels	Height	To suit enclosure width
LQP0104	LQP0104/V	100	400
LQP0106	LQP0106/V	100	600
LQP0108	LQP0108/V	100	800
LQP0110	LQP0110/V	100	1000
LQP0112	LQP0112/V	100	1200
LQP0204	LQP0204/V	200	400
LQP0206	LQP0206/V	200	600
LQP0208	LQP0208/V	200	800
LQP0210	LQP0210/V	200	1000
LQP0212	LQP0212/V	200	1200

Plinth Side Panels (Optional)

Side panels are optional depending on the configuration of your system (eg standalone enclosures would require 2 side panels, an enclosure in the middle of a tier wouldn't need any).

Solid panels	Vented panels	Plinth height	Enclosure depth
LQPC0104	LQPC0104/V	100	400
LQPC0106	LQPC0106/V	100	600
LQPC0108	LQPC0108/V	100	800
LQPC0204	LQPC0204/V	200	400
LQPC0206	LQPC0206/V	200	600
LQPC0208	LQPC0208/V	200	800

Bayed Plinth Blanking bracket

Product Code	Description
LQPB	Bayed plinth blanking bracket (2)