iLINQ Plinth Cladding

Plinth Cladding

Plinth cladding is suitable for installation onto the standard plinth kit or can be used to custom configure plinth solutions.

It is available in 100mm and 200mm heights with pipe lifting access holes and plugs and powdercoated textured matt black.

Available in solid and vented options, the plinth cladding is held in place with two M5 button head hex drive set screws.

iLINQ plinth cladding is used in conjunction with plinth corner pieces to give a completely customisable plinth system. This can incorporate solid and vented covers to suit any tier arrangement.

The iLINQ plinth kit already includes front and rear plinth covers.

Inclusions

Selection Chart

Plinth Cladding

Solid Vented Height To suit
enclosure side
LQPC0104 LQPC0104/V 100 400
LQPC0106 LQPC0106/V 100 600
LQPC0108 LQPC0108/V 100 800
LQPC0110 LQPC0110/V 100 1000
LQPC0112 LQPC0112/V 100 1200
LQPC0204 LQPC0204/V 200 400
LQPC0206 LQPC0206/V 200 600
LQPC0208 LQPC0208/V 200 800
LQPC0210 LQPC0210/V 200 1000
LQPC0212 LQPC0212/V 200 1200

Plinth Custom Configurations

To custom configure your plinth please follow the following steps: -

  1. For a 100mm high plinth you need 4 corner pieces - LQPF.
  2. For a 200mm high plinth you need 8 corner pieces plus a plinth stacking kit - 2 x LQPF and LQPS02
  3. If your plinth is to be bayed to another you need a bayed plinth blanking bracket - LQPB

Note that these are corner pieces, so one this configuration will cover all sizes of frame.

Once you have these corner pieces you can add plinth cladding as needed. Note that there is a single panel to cover 200mm high plinths. See below for part numbers: -

Solid Vented Height To suit
enclosure side
LQPC0104 LQPC0104/V 100 400
LQPC0106 LQPC0106/V 100 600
LQPC0108 LQPC0108/V 100 800
LQPC0110 LQPC0110/V 100 1000
LQPC0112 LQPC0112/V 100 1200
LQPC0204 LQPC0204/V 200 400
LQPC0206 LQPC0206/V 200 600
LQPC0208 LQPC0208/V 200 800
LQPC0210 LQPC0210/V 200 1000
LQPC0212 LQPC0212/V 200 1200