Aluminium Flameproof Fluorescent
Ex d Protection
Zones 1 & 2
Application
The flameproof fluorescent light fittings are manufactured from aluminium and are suitable for use in Zones 1 & 2 applications. They have been designed to meet the stringent requirements necessary for conformity to the new global IEC Ex certification scheme.
The aluminium body and polycarbonate diffuser allows the fixture to be used in the most arduous environments including metalliferous mining, cement works and industrial construction sites.
Suitable for a wide variety of applications across many industries where safety and reliability are of the highest priority. Applications include manufacturing plants, loading and storage areas, petrochemical, waste and sewage treatment works.
Features
- IP66 and IP67 protection rating - more info on IP ratings
- Electronic ballast
- High impact polycarbonate diffuser
- Removable chassis for easy lamp replacement
- Anti-vibration rubber mounts
- 2 x M20 entries
- Lamps - single or twin 18W or 36W
- Lamp holder - T8 Bi Pin
- Rated Voltage - 240V, 50Hz
Technical Information
- Certification number: IECEx KGS 07.0002x (20W)
IECEx KGS 07.0003x (40W) - Range: FL-*20dc**, FL-*40dc**
- Protection: Ex d IIC T6
- Ambient Temperature: -20ºC ~ +50ºC
- Conformity: IEC 60079-0, IEC 60079-1
Selection Chart
| Catalogue No. | Watts | No of Lamps | Length (mm) | Width (mm) | Height (mm) |
| FLUA018X1/C | 18W | 1 | 780 | 181 | 186 |
| FLUA018X2/C | 18W | 2 | 780 | 181 | 186 |
| FLUA036X1/C | 36W | 1 | 1395 | 181 | 186 |
| FLUA036X2/C | 36W | 2 | 1395 | 181 | 186 |
Inclusions
- Lamps
- 2 x M20 entries
- Anti-vibration rubber mounts
Construction
- Die cast aluminium
- High impact polycarbonate diffuser
- Electronic ballast
- Yellow powdercoat surface finish
- AC 240V, 50Hz
