Ancillary Equipment
Additional equipment for your Enclosure System
Enclosures can require additional equipment for their installation, maintenance or correct running. B&R can provide a range of ancillary equipment for your enclosure system. This includes climate control to keep your equipment at the optimum operating temperature and spares to customise, install and maintain your enclosure, including touch up paint kits, locks and spare keys.
Texa EGO
Air conditioners for door/wall mounting with cooling capacities from 380 to 10450W.
Texa DEK
Air conditioners for roof mounting with cooling capacities from 380-4050W.
Texa BLU/BIT
Air-water heat exchangers in wall (BLU) or roof (BIT) mounting configurations with cooling capacities from 1750 to 15000W.
Texa MIX
Air-air heat exchangers for wall mounting available with specific cooling powers from 14 to 80 W/K.
Texa FAN
Fans and filters for wall mounting with air flowrates from 55 to 550m³/h (for higher flowrates see the DLK range below).
Texa DLK
Ventilating units for roof mounting with air flowrates from 600 to 1050m³/h.
Texa WID
Anticondensation heaters with capacities from 45 to 550W, and configurations for natural convection, fan forced, and fan forced with built in thermostat.
Texa Accessories
A range of filter cloths, thermostats and other accessories suitable for Texa.
Enclosure Accessories
A range of locks, keys and touch up paint suitable for B&R's range of enclosures.
Switchboard Building Accessories
A range of switchboard building accessories such as busbar supports.